Main Features
1. GS Series AC/Solar charging Off grid Hybrid Inverter.
2. LED/LCD display, Enhanced functions setting via LCD.
3. Man-machine intelligent design.
4. Built-in 40A/60A optional MPPT solar charger controller.
5. LCD shows the solar power capacity.
6. 5 stages adjustable AC charging current. AC charging also can be closed.
7. AC/DC priority modes can be set.
8. Generator restart signal. (Dry contact).
9. 3 times peak power. Strong loading capacity.
10. Overload, output short-circuit protection......
| PRODUCT SPECIFICATION |
| Model |
GS8000W |
GS10KW |
GS12KW |
| AC |
Nominal Power |
8000W |
10KW |
12KW |
| Input |
Input Voltage Waveform |
Sinusoidal (utility or generator) |
| |
Nominal input Voltage |
230Vac ±10%rms |
| |
Low Line Disconnect |
184Vac±4%(Normal) or 135Vac±4%(Wide) |
| |
High Line Disconnect |
263Vac±4%(Normal) or 263Vac±4%(Wide) |
| |
Max AC input Voltage |
Max 270Vac |
| |
Frequency |
50Hz:41-54Hz, 60Hz:51-64Hz |
| AC |
Output Voltage Waveform |
Sine wave |
| output |
Power Factor |
0.9~1.0 |
| |
Nominal Output Voltage (V) |
230Vac ±10%rms |
| |
Nominal Output |
50Hz ± 0.3Hz, 60Hz ± 0.3Hz |
| |
Frequency (Hz) |
| Solar |
Rated Charge Current |
60A |
| charger |
PV Input Voltage range |
60-110VDC |
| |
Max.PV open circuit |
110VDC |
| |
array voltage |
| |
Charger mode |
MPPT |
| |
PV Low Voltage |
PV≥Bat.V+3V |
| |
Re-connect |
| |
PV Low Voltage |
PV<=Bat.V |
| |
Disconnect |
| |
Efficiency |
≥97% |
| AC |
Nominal Charger |
35A/50A/70A(According to the inverter model) |
| Charger |
Current |
5 stages adjustable charging current |
| |
Over charge Protection |
Bat.V≥62.0VDC battery beeps 0.5s every 1s & fault after 60s |
| Efficiency |
Efficiency(Battery Mode) |
≥87% |
| Efficiency (Line Mode) |
>98% |
| Battery |
Nominal DC input Voltage |
48VDC |
| Voltage |
Low Battery Alarm |
42VDC±1.2VDC |
| |
High DC input |
64VDC±1.2VDC |
| |
Alarm & Fault |
| |
Transfer |
20ms(max) |
| Time |
| System |
Over-Load Protection |
110% |
| Parameter |
the output,load>150%,beeps 0.5s every 1s,and Fault after 20s |
| |
Output Short Circuit |
Current limit (Fault after 10s) |
| |
Protection |
| |
Surge Rating(10s) |
1:3(VA) |
| |
Power Saver |
Load≤25W(Enabled on "P/S auto"Setting of Remote control) |
| |
Protections |
Low battery, over charging, over load, over temp |
| General |
Operating Temperature |
0ºC to 40ºC |
| Specifications |
Range |
| |
Storage Temperature |
-15ºC~60ºC |
| |
Operation humidity |
5% to 95%(non-condensing) |
| |
Audible Noise |
60dB max |
| |
cooling |
Forced air,variable speed fan |
| |
Dimension(L*W*H) |
627*416*204mm |
| |
Net Weight(kg) |
52.5 |
58.5 |
66.5 |
Product specifications are subject to change without further notice,the form is only for reference,please make the specific parameters as the standard.
ABOUT COMPANY
Nowadays, the world is faced with instability of nuclear power generation and environment problem,which is necessary result from the development without considering next generation.Accordingly, STIN established and targeted on being a Total Solution Company which is based on clean sustainable solar energy.Including polysilicon, ingot, wafer, cell and modulewhich are the base of Solar industry,STIN is also dealing with PV Equipment, EPC and O&M. Beyond the Eastern Asia, STIN is making an effort for the whole world's green energy independence.Starting with the supply of high-quality raw material from the China which is the number one PV Market in the world, making a PV plant in Korea and providing 3KW residential solution to South-EastAsia, STIN will keep solving the global environment problem.
STIN knows the importance of green energy.
STIN endeavors for protecting the precious value.
FAQ
1: What's your main products?
Solar panel mono and poly, solar battery gel and lithium-ion, solar system on grid and off grid, solar inverter on grid and off grid, solar charge controller MPPT and PWM.
2:What is your advantage in solar products?
We have been in solar industry for more than 10years and accumulated rich experience. With branch in Japan, Korea, Singapore and Cambodia, full support can be supplied from design to installation.
3: Can you send free samples?
It depends on which kind of products. Normally the sample fee will be returned after you place massive order.
4: What's the shipping cost?
After you confirm the quantity, please let us know which kind of transportation(by sea, by air, by DHL or Fedex or TNT or UPS) you prefer and the destination port. We will send you the shipping cost and time.
5: What's your minimum order quantity?
1pc.
6: How can we send the payment?
T/T, L/C, Paypal, Western Union.
){kind=link}