| Customization: | Available |
|---|---|
| Warranty: | 5 Years |
| Nature of Source Flow: | Passive inverter |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main features:
Rated power 6kw, power factor 1
Output voltage 120V/240V split phase or single phase 230V/240V
PV input voltage range 60 to 250V
Low-frequency inverter with large transformer
Pure sine wave AC output
Solar and utility can power loads at the same time
With CAN/RS485 for BMS communication
With the ability to work without battery
With AC coupling function
Parallel operation up to 6 units
High conversion efficiency up to 94%
Overload capacity 300%
Basic specification
| INVERTER MODEL | M6000LS | |
| Operating Temperature Range | -20°C to 50°C | |
| Storage temperature | -40°C~ 60°C | |
| Humidity | 5% to 95% Relative Humidity (Non-condensing) | |
| Altitude | <2000m | |
| Dimension, mm | 650x 365 x 247 | |
| Net Weight, kg | 38.5 | |
Line mode specification
| INVERTER MODEL | M6000LS | ||||
| Input Voltage Waveform | Sinusoidal (utility or generator) | ||||
| Nominal Input Voltage | 240Vac | ||||
| Low Loss Voltage | 184Vac±7V (UPS) | ||||
| 154Vac±7V (Appliances) | |||||
| Low Loss Return Voltage | 194Vac±7V (UPS); | ||||
| 164Vac±7V (Appliances) | |||||
| High Loss Voltage | 272Vac±7V | ||||
| High Loss Return Voltage | 262Vac±7V | ||||
| Max AC Input Voltage | 300Vac | ||||
| Nominal Input Frequency | 50Hz / 60Hz (Auto detection) | ||||
| Low Loss Frequency | 45±1Hz | ||||
| Low Loss Return Frequency | 47±1Hz | ||||
| High Loss Frequency | 65±1Hz | ||||
| High Loss Return Frequency | 63±1Hz | ||||
| Output Short Circuit Protection | Line mode: Circuit Breaker | ||||
| Battery mode: Electronic Circuits | |||||
| Efficiency (Line Mode) | >95% ( Rated R load, battery full charged ) | ||||
| Transfer Time | 10ms typical (UPS); 20ms typical (Appliances) | ||||
Inverter mode specification
| INVERTER MODEL | M6000LS |
| Rated Output Power | 6KVA/6KW |
| Output Voltage Waveform | Pure Sine Wave |
| Output Voltage Regulation | 120/240Vac±5% |
| Output Frequency | 60Hz or 50Hz |
| Peak Efficiency | 94% |
| Overload Protection | 5s@≥150% load; 10s@110%~150% load |
| Surge Capacity | 3* rated power for 5 seconds |
| Nominal DC Input Voltage | 48Vdc |
| Cold Start Voltage | 46.0Vdc |
| Low DC Warning Voltage | |
| @ load < 20% | 44.0Vdc |
| @ 20% ≤ load < 50% | 42.8Vdc |
| @ load ≥ 50% | 40.4Vdc |
| Low DC Warning Return Voltage | |
| @ load < 20% | 46.0Vdc |
| @ 20% ≤ load < 50% | 44.8Vdc |
| @ load ≥ 50% | 42.4Vdc |
| Low DC Cut-off Voltage | |
| @ load < 20% | 42.0Vdc |
| @ 20% ≤ load < 50% | 40.8Vdc |
| @ load ≥ 50% | 38.4Vdc |
| Low DC Cut-off Voltage (Li Mode) | 42.0Vdc |
| Low DC Warning SOC (Li Mode) | Low DC Cut-off SOC +5% |
| Low DC Warning Return SOC (Li Mode) | Low DC Cut-off SOC +10% |
| Low DC Cut-off SOC(Li Mode) | Default 20%, 5%~49% settable |
| High DC Recovery Voltage | 58Vdc |
| High DC Cut-off Voltage | 60.8Vdc |
| No Load Power Consumption | <35W |
Charging mode specification
| INVERTER MODEL | M6000LS |
| Efficiency | 98.0% max. |
| Max. PV Array Open Circuit Voltage | 250Vdc |
| PV Array MPPT Voltage Range | 60~250Vdc |
| Min battery voltage for PV charge | 34Vdc |
| Battery Voltage Accuracy | 0.30% |
| PV Voltage Accuracy | +/-2V |
| Charging Algorithm | 3-Step |
| Joint Utility and Solar Charging | |
| Max Charging Current | 140Amp |
| Default Charging Current | 60Amp |
ABOUT COMPANY
Nowadays, the world is faced with instability of nuclear power generation and environment problem,which is necessary result from the development without considering next generation.Accordingly, STIN established and targeted on being a Total Solution Company which is based on clean sustainable solar energy.Including polysilicon, ingot, wafer, cell and modulewhich are the base of Solar industry,STIN is also dealing with PV Equipment, EPC and O&M. Beyond the Eastern Asia, STIN is making an effort for the whole world's green energy independence.Starting with the supply of high-quality raw material from the China which is the number one PV Market in the world, making a PV plant in Korea and providing 3KW residential solution to South-EastAsia, STIN will keep solving the global environment problem.
STIN knows the importance of green energy.
STIN endeavors for protecting the precious value.
FAQ
1: What's your main products?
Solar panel mono and poly, solar battery gel and lithium-ion, solar system on grid and off grid, solar inverter on grid and off grid, solar charge controller MPPT and PWM.
2:What is your advantage in solar products?
We have been in solar industry for more than 10years and accumulated rich experience. With branch in Japan, Korea, Singapore and Cambodia, full support can be supplied from design to installation.
3: Can you send free samples?
It depends on which kind of products. Normally the sample fee will be returned after you place massive order.
4: What's the shipping cost?
After you confirm the quantity, please let us know which kind of transportation(by sea, by air, by DHL or Fedex or TNT or UPS) you prefer and the destination port. We will send you the shipping cost and time.
5: What's your minimum order quantity?
1pc.
6: How can we send the payment?
T/T, L/C, Paypal, Western Union.
){kind=link}